About the Pulsar Range
The Pulsar is a ceiling-mounted infrared heaters designed for high ceiling installations / large spaces in constant use. Its striking appearance and heat efficiency make Pulsar ideal for heating public spaces in commercial areas, shops, showrooms, sports facilities and public halls where it will be in the public eye.
When installed in combination with modern control systems that turn the heating on just before it is required and off when you leave (or actually just before) Pulsar has successfully delivered significant cost-savings to clients compared with their existing systems (please inquire for case studies).
Each Pulsar unit produces effective comfortable levels of heat for very low wattage. Due to the perfect radiant properties of the Pulsar design and the low wattage required by the ceramic elements to raise the surface temperature of the unit to 200°C the 1800 – 2400 W Infrared in the Pulsar is adequate to heat a floorspace of 19m2 from a height of 2.8m (1800W) and 3m (2400W). You would require at least 4000W from a Quartz heater or up to 12kW from a gas heater to achieve an equivalent comfort effect. They are consequently vastly cheaper to run than hot air or gas-burning “space ray” heating systems or other forms of electric heating often used in these environments. But there are additional benefits:
- As there are no exhaust emissions there is no requirement for planning;
- They operate silently and without fumes – consequently raising no health and safety issues;
- Installation is much cheaper than oil or gas alternatives – all you require is electric cable;
- No maintenance. You do not have to maintain an infrared heater once installed;
- You can “focus” the heat exactly to where you want it – because there is no convection of heat, none is wasted blowing into areas it is not wanted;
- Far Infrared has been shown to have positive effects on metabolism, being the waveband at which water (80% constituent of skin) most effectively absorbs heat.
The Pulsar can be used anywhere there is a requirement to heat a large space and where the heaters themselves can be placed well out of reach. So workplaces like workshops, industrial or commercial units, warehouses etc make ideal locations for heaters of this sort.
Why Use Infrared Heating?
1) HERSCHEL FAR INFRARED HEATING IS 100% NATURAL FOR OUR BODIES AND OUR WELL-BEING.
The human body is designed to accept and to emit infrared waves. Far Infrared heating works on the basis of gentle, long-wave Infrared which penetrates the air and heats solids. If you like the warmth of the sun then you will love the feeling you get from your new infrared heating system.
2 HERSCHEL FAR INFRARED HEATING DOES NOT HEAT AIR BUT THE FABRIC OF THE BUILDING
It is different to more traditional heating systems that just heat the air. The fabric of the building can retain heat for longer, creating better thermal comfort, so your property will not only be warmer and cosier, there will be less dust, and for asthma and allergy sufferers, less pollutants to breathe in.
3 LESS DAMP AND MOULD BECAUSE HERSCHEL FAR INFRARED HEATING WARMS WALLS AND KEEPS THEM DRY.
This will mean there is no damp or mould to ruin your decorations and all of the room will reach the same temperature.
4 GREATLY REDUCED ENERGY USE.
Experience shows that a sufficiently insulated building fitted with infrared systems and controls can expect significant reductions in energy usage.
Almost 100% of the electrical energy used by Infrared heaters is converted into heat. Our Infrared systems offer owners an unprecedented level of control over their property’s temperature and energy use, and offer higher thermal comfort levels. Compared with other gas oil or electric solutions, Infrared heating saves between 30 – 60% of the annual energy usage.
5 HERSCHEL FAR INFRARED HEATERS REQUIRE NO MAINTENANCE OR SERVICING.
Our heaters use solid state elements unlike water-based heating or fan-assisted systems, which often require servicing, inspection and repair costs. Herschel Infrared heaters and control products are certified to national safety standards.
6 HERSCHEL FAR INFRARED HEATING IS COMPLETELY FREE OF ALL CARBON EMISSIONS.
When used with electricity produced either by wind or solar generated electrical energy, is one of the only heating systems that can truly claim to be 100% carbon free.
An Introduction to Hershel Infrared Heating
Why buy from Greenvision Energy?
We are Green Deal Providers and specialise in cost-effective ways to reduce your energy bills and carbon footprint by installing energy efficient measures to homeowners, tenants, commercial clients and trade partners. Our aim has always been to offer comprehensive solutions and to satisfy customers through expert advice, detailed product knowledge, fantastic value and the very highest levels of service. We pride ourselves on our levels of service and our number one objective is to save customers money!
SKU IRPULSAR-2400B Brands Hershel Dimensions Hershel 80 dia Hershel Range IR Power 2400 W