Toggle Nav

Free support call:

0115 854 7498

Shopping Cart
  • Menu
  • Setting

Dyson Airblade V Handryer

£670.08 £558.40
In stock
Airblade V
Concentrated Airblade™ technology
Dyson Airblade mini banner

Low Maintainance

The Dyson Airblade V hand dryer can be mounted or removed from the wall quickly and easily thanks to its innovative backplate. This installation design means all Dyson Airblade V hand dryers come with a 5 year self-service guarantee.

Takes up less space

The Dyson Airblade V hand dryer has a slim profile that protrudes just 10cm from the wall. It's 60% smaller than the original Dyson Airblade™ hand dryer, but still dries hands in just 10 seconds. Concentrated, not compromised.

Airblade™ hand drying technology

Every second, up to 35 litres of air are forced through apertures up to 0.8 mm wide. The result – 430mph sheets of air that scrape water from hands, drying them hygienically in just 10 seconds.

Saves you money

The Dyson Airblade V hand dryer costs an average of just £43 to run for a year. That's up to 69% less than other hand dryers, and up to 97% less than paper towels

Cuts your carbon footprint

The Dyson Airblade V hand dryer has a lower environmental impact than other hand drying methods. It produces 3.5g of CO2 per dry – up to 77% less than other hand dryers and up to 75% less than paper towels.

Eases washroom congestion

The Dyson Airblade V hand dryer takes 10 seconds to dry hands completely. So users spend less time in the washroom, and busy periods are easier to manage.

Dyson digital motor technology

The Dyson digital motor V4 is one of the world's smallest fully-integrated 1600W motors. It spins 90,000 times a minute, generating the power that makes Airblade™ technology possible.

Dries hands with clean air

Dyson Airblade V hand dryers use HEPA filters that capture 99.9% of bacteria and viruses from the air used to dry hands. So hands are dried with cleaner air, not dirty air.

HEPA filtration

The Dyson Airblade V hand dryer has two H13 HEPA filters on either side of the machine. Each one has a grille to capture larger debris, a fleece layer to capture fluff and fibres, and a pleated HEPA media to capture particles as small as 0.1 microns.

Why buy from Greenvision Energy?

We are Green Deal Providers and specialise in cost-effective ways to reduce your energy bills and carbon footprint by installing energy efficient measures to homeowners, tenants, commercial clients and trade partners. Our aim has always been to offer comprehensive solutions and to satisfy customers through expert advice, detailed product knowledge, fantastic value and the very highest levels of service. We pride ourselves on our levels of service and our number one objective is to save customers money!

More Information
SKU Airblade V
Number Of Elements No
Manufacturer Dyson
Heat Source No
Average Lifetime No
Battens No
Base No
btu No
Body Colour No
Bulkheads No
Product Name No
Connections No
Charging Storage Heater No
Connections inlet No
Convector Output No
depth No
Dimensions LED No
Dimmable No
Dimensions Hershel No
ean No
Energy Rating LED No
EQ Watts No
elements No
Flow Rate 3 BAR No
Flow Rate 5 BAR No
Finish LED No
height No
Hershel Range No
IP Rating LED No
Light Temp No
Litre No
Lumens No
Lumen Per Watt No
Material No
MAx inlet pressure No
Max inlet temperature No
Min inlet pressure No
Models No
Power No
Powered by No
Strips No
Storage Heaters Frequency No
Storage Heater Output No
Storage Heater Blocks 8 No
Storage Heater Block 12 No
Spray functions No
Timed flow cut off No
Volume No
Warranty No
width No
Wattage No
Watts No
Wi-Fi No
dimensions No
Cylinder No
Warranty No
Weight Full No
Weight Empty No
Immersion No
Weight No
Remote No
PDF View No
IP Rating No
Class No
Fixings No
LED Fitting Type No
Dimmable No
Storage Heater Type No
No downloads are available for this product at this time.
Write Your Own Review
You're reviewing:Dyson Airblade V Handryer