Dyson Airblade Tap Handryer
No waste water on the floor
With Airblade™ hand drying technology in a tap, hands can be dried at the sink in just 12 seconds. There's no need for users to move to a separate drying area, so no water is dripped on the floor.
Free up your washroom
Other hand drying methods take up valuable wall and floor space. With the Dyson Airblade Tap hand dryer, there's room for extra toilet cubicles and other facilities.
Airblade™ hand drying technology in a tap
Every second, up to 35 litres of air are forced through apertures up to 0.8 mm wide. The result – 430mph sheets of air that scrape water from hands, drying them hygienically in just 12 seconds.
Saves you money
The Dyson Airblade Tap hand dryer costs an average of just £48 to run for a year. That's up to 69% less than other hand dryers, and up to 97% less than paper towels.
Cuts your carbon footprint
The Dyson Airblade Tap hand dryer has a lower environmental impact than other hand drying methods. It produces 4.0g of CO2 per dry - up to 74% less than other hand dryers and up to 71% less than paper towels.
Eases washroom congestion
The Dyson Airblade Tap hand dryer takes 12 seconds to dry hands. So users spend less time in the washroom, and busy periods are easier to manage.
Dyson digital motor technology
The Dyson digital motor V4 is one of the world's smallest fully-integrated 1600W motors. It spins 90,000 times a minute, generating the power that makes Airblade™ technology possible.
Dries hands with clean air
Dyson Airblade Tap hand dryers uses a HEPA filter that captures 99.9% of bacteria and viruses from the air used to dry hands. So hands are dried with cleaner air, not dirty air.
The HEPA filter removes airborne particles from the air. It has a grille to capture larger debris, a fleece layer to capture fluff and fibres, and a pleated HEPA media to capture particles as small as 0.1 microns.
Why buy from Greenvision Energy?
We are Green Deal Providers and specialise in cost-effective ways to reduce your energy bills and carbon footprint by installing energy efficient measures to homeowners, tenants, commercial clients and trade partners. Our aim has always been to offer comprehensive solutions and to satisfy customers through expert advice, detailed product knowledge, fantastic value and the very highest levels of service. We pride ourselves on our levels of service and our number one objective is to save customers money!
|SKU||Airblade Tap Handryer|
|Number Of Elements||No|
|Charging Storage Heater||No|
|Energy Rating LED||No|
|Flow Rate 3 BAR||No|
|Flow Rate 5 BAR||No|
|IP Rating LED||No|
|Lumen Per Watt||No|
|MAx inlet pressure||No|
|Max inlet temperature||No|
|Min inlet pressure||No|
|Storage Heaters Frequency||No|
|Storage Heater Output||No|
|Storage Heater Blocks 8||No|
|Storage Heater Block 12||No|
|Timed flow cut off||No|
|LED Fitting Type||No|
|Storage Heater Type||No|