Commercial LED Lighting Guide
In the past, most premises have been lit up by incandescent or halogen lightbulbs. Unfortunately, these bulbs waste 95% of the electricity they use by converting it into heat. EU regulations have been put in place to phase out these inefficient bulbs as part of their plan to improve Europe’s energy efficiency, and this one measure is set to reduce our CO₂ emissions by up to 15 million tons a year. This means that companies now have to replace their old bulbs with energy efficient alternatives like LEDs. With a possible saving of 90% on your energy bill, can you afford to take a look at LEDs?
What is LED Lighting?
Light-Emitting Diodes (‘LEDs’) are the most efficient light source currently available. Unlike common but outdated light sources like incandescent, CFL and halogen bulbs, LEDs are incredibly durable due to them not being made of fragile elements such as glass tubes or filaments. They also do not contain the dangerous materials of mercury or lead that are common in older bulbs, ensuring that lighting is safer as well as more durable. LEDs also use 90% less energy than traditional lighting systems, allowing you to save money on your energy bill as well as replacement costs.
What are the benefits of LED lighting?
The main benefit of LEDs is their energy efficiency; due to their extremely efficient electricity conversion system, LED bulbs use up to 90% less energy than an incandescent or halogen bulb and much less is wasted in heat. The absence of heat emitted by LEDs not only makes them safer to handle, but the efficiency with which they convert electricity allows these advanced lightbulbs to easily achieve the same light output of a bulb with a much higher wattage. For example, a typical 4W LED bulb would have no problem emitting the same – or greater – brightness as a 50W halogen bulb.
Using less energy to light your premises not only significantly reduces energy bills but also helps cut carbon emissions. Reducing the number of products made using dangerous materials like lead and mercury (classed as the most toxic heavy metals in the world) also reduces the chance of pollution when the bulbs are thrown away. In this manner, LED bulbs are not just good for your energy bill, but also for the environment.
LEDs also have an exceptional duration expectancy, with some LED bulbs lasting in excess of 50,000 hours. This is due to the advanced thermal management of LEDs, which are able to remove excess heat from the bulb through ‘heat sinks’. This slows down lumen depreciation, prolonging the life of the bulb. In combination with the fact that LEDs are not made from fragile materials, this means the replacement costs of LEDs are exceptionally low and infrequent.
Since LEDs exist as direct replacements for older, more inefficient bulbs such as halogen, incandescent or CFL bulbs, LEDs are designed in most caps, shapes and sizes in order to work in your existing fittings. That means you don’t need to change anything in your existing lighting system except the bulb to start making energy savings.
LEDs and Automated Lighting
Since LEDs are the pinnacle of energy efficient lighting, they have been made with all possible uses in mind, including ‘Automated Lighting’. A premises controlled by an ‘Automated’ lighting system is one filled with ‘smart’ technologies that automatically adjust to your routine or can be controlled remotely via mobile Apps.
Using innovative Geofencing and ‘IFTTT’ (‘If This Then That’) technology, your lighting system can sync itself to your phone’s location and only become active when necessary. These systems also allow you to connect your lighting to whatever websites or apps you like, personalising your lighting to your every need. For example, you can have all your home lights turn off when you leave for the office, or have the lights of your delivery entrance automatically turn on when there is a delivery scheduled in the calendar. Once you’ve set these preferences using the App, you’ll never have to worry about your Automated lighting system again – a ‘smart’ lighting system will automatically adjust depending on your location, no matter what the change of plan.
With an Automated Lighting App, you would be able to see which lights on your property are on and control all of them from anywhere in the world. Being able to monitor your lighting so closely not only improves reducing hassle, but is also a great way to easily save money on energy bills. An Automated lighting system would only light rooms in use, and would automatically turn off lights when you leave, making them an ideal energy-saving investment.
Want to learn more about Automated Lighting? Check out our Home Automation Guide.
How much could I save with LEDs?
Since around 40% of the energy consumed in buildings is used for lighting, it’s extremely important that bulbs are energy efficient in order to minimise energy bills. LED bulbs use up to 90% less energy than an incandescent or halogen bulb and far less energy is wasted as heat, allowing you to light your buildings for less. Even though they use far less energy, LEDs do not compromise on brightness; due to the efficiency with which they convert electricity, LED bulbs can emit the same level of brightness as a standard bulb using far less wattage. For example, a standard 4W LED bulb would easily achieve the same brightness as a 50W halogen bulb. LEDs also last 25 times longer than a regular halogen bulb, drastically reducing replacement costs. The savings made by LED bulbs can mean a return on investment within five months.
If combined with an Automated Lighting system, the savings from LED bulb could be even greater. By only lighting your premises when you really need to, you can minimise your lighting bill while improving the security and comfort of your property.
Check out our Home Automation Guide.
Lumens - The brightness of LEDs is measured in Lumens (Lm). The higher the number of Lumens, the brighter the bulb. Since LEDs are still relatively new and unfamiliar to customers, most LED bulbs will say their equivalent wattage so that customers can replace their old bulbs while keeping the same brightness in their home.
Heat sinks - Heat Sinks provide a path through which heat can escape the LED, reducing the depreciation of lumens and increasing the lifespan of the bulb. Usually made of aluminium, Heat Sinks can dissipate heat via conduction, convection and radiation. LEDs contain other features to help with ‘Heat Sinking’, such as metal fins and wings to increase surface area.
LED Colour Temperature - The ‘Correlated Colour Temperature’ (CCT) in lighting describes how the colour of the light emitted from a lamp appears to the human eye and it is measured in Kelvins (K). With standard, outdated halogen or incandescent bulbs, most people could not choose the ‘colour’ of their lamps. Now, a range of LED bulbs have been made with different CCTs, allowing you to choose the ‘warmth’ and ‘colour’ of the light in your home.
Kelvin scales are common to help customers get the right light colour for their rooms. Counterintuitively, the higher the number of Kelvins, the ‘cooler’ a light will look. 2700K is about the equivalent to the warm, yellow light emitted by a conventional lamp (most popular for homes) while 10,000K is what most people would associate with the light of a clear blue sky, which might be ideal for a more clean, modern look.
For commercial properties, it is incredibly important to think about the type of ‘feel’ you want in your rooms. Businesses where it is crucial to be able to properly see the product, such as in retail or art studios, would benefit from bulbs that emit light close to ‘daylight’ (around 5000K), but the products in a bakery would look more appetising under a warm white light than a cool white light. Not sure what kind of lighting you need? We are always happy to give free and impartial advice on any of your energy efficiency questions and queries. Contact us on 0115 854 7498 or via firstname.lastname@example.org.
Correlated Colour Temperature Chart
Ways to pay for LED lighting...
Though our LEDs save money and often have a quick return on investment, the upfront cost of installation can be daunting, especially if you are replacing the lighting of your whole house. However, it can be cost effective to replace all the bulbs in your house in one go, putting the cost on a credit card, because the savings are so good.
At Greenvision Energy, we also offer our unique ‘Pay As You Save’ scheme, where you put down a small deposit then pay for your replacement LED Lighting over 6, 9 or 12 months. This is a fantastic way to pay for your new LED lighting as the savings made each month on your energy bill will cover the cost of the LED lights. Why not have a look at our 'Pay As You Save' guide?
Frequently asked LED questions
- How bright are LED bulbs?
As with any lightbulb, LEDs vary in brightness from anywhere between 50 to 1200 Lumens. Look out for number of Lumens to tell you how bright the LED is. As well as their number of lumens and wattage, most LED lightbulbs will also state their equivalent wattage to outdated halogen bulbs.
- How efficient are LED bulbs compared with incandescent or halogen bulbs?
LED bulbs use 90% less energy than old fashioned bulbs, which are why old, inefficient lighting systems such as incandescent and halogen bulbs are currently being phased out under EU regulations.
- How long do LEDs last?
Due to the advanced thermal management of LEDs, such as their durable ‘heat sinks’, the lumen depreciation of LED is extremely slow. This means that LEDs have an exceptionally long life span compared to outdated incandescent and halogen bulbs, with some LEDs lasting up to 50,000 hours. LEDs are also not made from the traditional, fragile materials that lightbulbs used to be made of, such as glass tubes and filaments. This means that they break far less easily, significantly reducing replacement costs.
- Is it true that bulbs with more LEDs are brighter than bulbs with less?
Though the number of LEDs in a bulb can affect its brightness, the most accurate indicator of a bulb’s brightness is its Lumen count. You can also look for ‘Lux’: how bright a light is on a surface at a specified distance.
- What is CCT and what does ‘cool white’ or ‘warm yellow’ mean?
CCT stands for Color Correlated Temperature. This is a scale that describes how the colour of the light emitted from a lamp appears to the human eye. Measured in Kelvins (K), bulbs with 2700K emit light about the equivalent to the warm, yellow light of a conventional lamp (most popular for homes) while 10,000K is what most people would associate with the light of a clear blue sky, which might be ideal for a more clean, modern look. Find out more about CCT and other colour descriptors in the ‘LED Jargon’ section of our guide above.
- Can LEDs be used as part of my Automated Lighting system?
Yes – some ‘smart’ LEDs have Automated technology built into the bulb, allowing you to control the bulb directly from your phone. Unfortunately, these bulbs can be expensive. If you don’t want to buy LEDs pre-set with Automated technology, products such as the MiHome Light Switch give you full control over all your existing lighting without need to replace any lightbulbs.
- How long do LEDs take to ‘warm up’ before they emit full brightness?
It is a common misconception that LEDs take a long time to achieve full brightness after being turned on. Some of the first LEDs on the market did only emit a faint glow at first before reaching full brightness, but LED technology has advanced significantly since then and LED bulbs now emit full brightness instantaneously.
- Do LEDs produce heat like my old incandescent bulbs?
Outdated lighting systems like incandescent and halogen bulbs get hot because 95% of the electricity they use is wasted by being turned into heat. The electricity conversion system of LED bulbs is much more efficient, using 90% less energy and emitting far less heat. This means that the bulb does not get hot, making them much safer to handle. Some LEDs, such as the Integral LED Night Light, are specially designed to be extremely safe and are cool to the touch.
- Are LEDs dimmable?
Most LEDs are dimmable but check in the product specification before buying. To be able to dim an LED, you will either need to buy LEDs compatible with a traditional dimmer or replace your existing dimmer with a dimmer specifically designed for LEDs.
- Can I create mood lighting with LEDs?
Due to their versatility and range of colours, LEDs are one of the easiest ways to create mood lighting on the market. LED strip lights can be can be cut, curved and connected to any space in your home and the ability to dim LEDs mean that you can create any mood you wish. You can also choose LEDs for their ‘colour’ and ‘temperature’, helping your bedroom feel snug and warm or your office calm and bright. Find out more in the ‘LED Jargon’ section of this guide.
What are the most popular LED Lighting products?
Ideal for offices, airports, retail environments, schools, universities and more, Integral’s LED Panels use advanced Everlight LEDs and a polycarbonate diffuser to emit an even, bright light for up to 50,000 hrs. Though Integral’s LED Panels are 40% more efficient than conventional tubes, these modern, ‘clean-look’ panels don’t compromise on quality, instantly achieving full brightness as soon as turned on. Ranging from 3000 to 8500 Lumens and offering a range of Colour Temperatures, Integral’s LED Panels have a long and maintenance-free life cycle with a typical return on investment of two years.
The Integral LED Bulkhead’s edge-lit design provides a 200° wide-beam angle for even, shadow-free light distribution in 4000K White Light. Due to their durable, high-grade polycarbonate casing, this simple energy-saving solution is ideal for environments where the lighting might be damaged, including bathrooms and sheltered external areas. The energy efficiency of ‘Instant On’ Integral Tough-Shell Bulkheads combined with their long lasting lifespan of 25,000 hours and low maintenance design ensures minimum expenditure with maximum savings.
LED Strips are the most versatile of LED lighting; Integral LED Strips can be cut, curved and connected to any space in your commercial environment to create the perfect ambience. Commonly found in the hospitality industry, the flexibility and high quality colour consistency of LED Strips makes theis water-resistant lighting solution ideal for Restaurants, Hotels, Clubs, Pubs and many more. Available for indoor and outdoor use.
Emitting a huge 18,000 Lumens, Integral LED High Bays provide the light you need for your business environment while making huge energy savings. Made with Everlight LEDs and a polycarbonate diffuser, these A+ energy rating, versatile bulbs consistently emit a bright, 5000K (‘daylight’) light to make your property feel comfortable yet fresh. The Integral range of LED High Bays all achieve full brightness in less than one second and will continue to provide excellent light quality without faltering for up to 50,000 hours.
The Integral GU 10 LED range uses 90% less energy than halogen bulbs while emitting far superior lighting. These A+ rated bulbs have an average life span of 25,000 hours and give full instant light with the ability to be dimmed. Though the Integral GU 10 range only use 5W, their equivalent wattage is 50W: more power for less energy. Due to their sleek design and energy saving potential, GU10s are extremely popular in kitchens and bathrooms.
The simple installation that enables you to manage all your existing lighting from on the go. MiHome’s Light Switches can be controlled via the simple MiHome App or manually using the button on the Light Switch’s casing. Easily see which lights in your property are on, adjust their brightness and set timers through the easy-to-use App or let Geofencing technology automatically adjust your light based on your phone’s location. IFTTT enabled.
Benefits of LED Lighting
Reduce your lighting bill by up to 90%
Easy installation, no electrician required
5 year guarantee on all LED light fittings
Our LED lights last up to 10 years with no need for replacements
Often Home Automation enabled